BreatheAudio NTL24950 User Manual download pdf (Page 7)

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own Phillips screwdriver . For

help identifying the assembly hardware, see the hardware drawings below.

1. Raise the end of the Frame (not shown) until the tread-

mill can be moved on the front Wheels (66), and care-

fully roll the treadmill off the wood pallet.

Insert the Wire Harness (108) and the TV Cable (109)

through the Upright Plate (115).

With the help of a second person, hold the Upright (111)

and the Upright Plate (115) against the Frame Cover

(52). See the inset drawing and make sure that the

Upright and the Upright Plate are oriented as

shown. Attach the Upright and the Upright Plate with

four Upright Bolts (113) with two Star Washers (114).

Do not tighten the Upright Bolts yet.

Washer (116)–4

Console Bolt (110)–4

3/4” Tek Screw

(91)–4

Upright Bolt (113)–4

Panel Screw

(139)–3

Frame Bolt (31)–4

Handrail Bolt (90)–4

Star Washer

(114)–4

114

115

113

109

111

108

111

115

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

No comments

BreatheAudio NTL24950 User Manual Page 7